The V-12 HDPE Consumer Mortar Rack is the way to get a professional looking display that fills the sky with your 1.75” consumer firework shells.
Mortar racks are a sure fire way to make your firework shells more enjoyable to use since you no longer have to load and then fire one shell at a time. A good rack opens up a whole new world of possibilities allowing you to fuse up multiple shells or even electronic firing with a remote firing system!
12 shots fired in a V shape
racks are angled 15 degrees off center for a 30 degree included angle. Perfect for limited overlap on your shells breaks. This effect looks very clean.
High quality HDPE mortars. Much better than fiberglass to use.
The wide footprint helps prevent the rack from tipping over better than the small bases on the tubes that comes in the shell kit.
Made with solid pine boards. 1.5” thick bottom frame and 3/4” thick rails for a beefy construction
Constructed with TiteBond III waterproof wood glue and epoxy coated deck screws for a strong weatherproof hold.
Use racks at least 150’ away from spectators and buildings.
Racks will ship with the “feet and braces” removed for lower shipping costs. The feet and braces are pre drilled and countersunk for the included deck screws. All you need to do is reattach them with a T25 screw driver or bit in a drill.
The V-12 HDPE Consumer Mortar Rack is the way to get a professional looking display that fills the sky with your 1.75” consumer firework shells.
Mortar racks are a sure fire way to make your firework shells more enjoyable to use since you no longer have to load and then fire one shell at a time. A good rack opens up a whole new world of possibilities allowing you to fuse up multiple shells or even electronic firing with a remote firing system!
12 shots fired in a V shape
racks are angled 15 degrees off center for a 30 degree included angle. Perfect for limited overlap on your shells breaks. This effect looks very clean.
High quality HDPE mortars. Much better than fiberglass to use.
The wide footprint helps prevent the rack from tipping over better than the small bases on the tubes that comes in the shell kit.
Made with solid pine boards. 1.5” thick bottom frame and 3/4” thick rails for a beefy construction
Constructed with TiteBond III waterproof wood glue and epoxy coated deck screws for a strong weatherproof hold.
Use racks at least 150’ away from spectators and buildings.
Racks will ship with the “feet and braces” removed for lower shipping costs. The feet and braces are pre drilled and countersunk for the included deck screws. All you need to do is reattach them with a T25 screw driver or bit in a drill.
